Bicomponent primers

PRIMAIRE FORDUREX KP32

Bicomponent, fast-drying, anti-corrosive polyurethane primer/intermediate with excellent adhesion to metal surfaces.

PRIMAIRE FORDUREX HES KP33

Anti-corrosive polyurethane primer with high solids content. Ensures excellent filling and smoothing of the substrate. Guarantees a glossy, tight finish. Can be applied in great thickness, excellent adhesion.

PRIMAIRE 2K ÉCONOMIQUE KP39

Polyurethane/polyester primer. Fast drying.

PRIMAIRE 2K KP40

2K PU primer with very fast drying and curing. Ferrous and non-ferrous. Most commonly used mixing ratio 10:1 by volume.

EPOXY ZINC KE41

Bicomponent, zinc-rich (92.5% by weight), epoxy polyamide anti-corrosive primer. Provides excellent cathodic protection of steel. Specially designed for the application of very high-quality anti-corrosive systems in very aggressive environments. Precondition sand blasting SA 2.5.

PRIMAIRE EPOXY KE42E2

Anticorrosive, bicomponent epoxy that forms a hard yet flexible film. Excellent adhesion to non-ferrous substrates. Specially designed for the application of highly effective anti-corrosive systems.

HYDRIOPRIM E100

Two-component waterborne epoxy primer with a very high content of corrosion inhibiting pigments.

PRIMAIRE EPOXY KE44

Epoxy primer for car bodywork, very good stretch.

EPOXY MODIFIE  KE62

Two-component primer or intermediate. Primer for maintenance work and for non-immersed steel. Has the advantage of being more tolerant of minimum and maximum overlap than conventional epoxy paint. Offers excellent anti-corrosive qualities.

PRIMAIRE EPOXY FERCOAT KE4

High solids 2K primer/intermediate, surface tolerant. For the care and maintenance of steel and concrete structures. Can be applied in areas where sandblasting is not possible or not permitted.

PRIMAIRE EPOXY MODIFIE HES BT KE7

For the protection of metal structures in the air or immersed in fresh water, sea water or brackish water. Adhesion on cold or wet surfaces, appreciated in high thickness (up to 600 microns dry).

EPOXY PHENOLIQUE KE43

Thick layer coating with excellent resistance, including while in immersion in aggressive chemicals and solvents. For tank interiors, cisterns, retention tanks, skip interiors, etc. Resistant to a wide range of aggressive products (consult us).

BRAI EPOXY LE32

High solids 2C anti-corrosive paint made of special black and epoxy resin. Excellent adhesion to metal substrates as well as to concrete. Application in great thickness. For immersed and non-immersed environments. Provides excellent protection in aggressive environments (metal structures in contact with fresh or sea water, underground tanks, channels etc.)